Diagnostic error messages
The following tables display the primary hardware failure messages that the
diagnostics might display.
Function: core system messages (001)
Result
Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed
Processor board, ECC Test
Action: Have the system serviced.
Failed
System board
Action: Have the system serviced.
Function: video system messages (005)
Result
Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed
Processor and system boards
Action: Have the system serviced.
Function: serial port messages (011)
Result
Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed
Built-in serial port on system board
Action: Have the system serviced.
Function: parallel port messages (014)
Result
Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed
Built-in parallel port on system board
Action: Have the system serviced.
Function: USB port interface messages (015)
Result
Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Aborted
Can NOT test USB interface while it is in use
If you have a USB keyboard or mouse attached to your server, you cannot run the
diagnostic program for the USB interface.
Action: If you want to test the USB interface, turn off the server, disconnect the
USB keyboard and mouse, attach a regular keyboard and mouse, turn on the
server, and then run the diagnostic program for the USB interface.
Chapter 6. Solving problems
127
Summary of Contents for eServer 240 xSeries
