Table 15 (Page 2 of 4). Light path diagnostics
System Error
LED (operator
information
panel)
Lit LED on
diagnostic LED
panel
Cause
Action
On (continued)
PCI BUS A
An error occurred on PCI bus A. An
adapter in PCI slot 1 or 2 or the system
board caused the error.
1. Check the error log for additional
information. If the error log
indicates a problem with the
integrated Ethernet controller, have
your system serviced.
2. If you cannot isolate the failing
adapter from the information in the
error log, try to determine the
failing adapter by removing one
adapter at a time from PCI bus A
(PCI slot 1 and 2) and restarting
the server after each adapter is
removed.
If the problem persists, have the
system serviced.
PCI BUS B
An error occurred on PCI bus B. An
adapter in PCI slot 3, 4, or 5, or the
system board caused the error.
1. Check the error log for additional
information. If the error log
indicates a problem with the
integrated SCSI controller, have the
system serviced.
2. If you cannot correct the problem
from the information in the error
log, try to determine the failing
adapter by removing one adapter
at a time from PCI bus B (PCI slots
3–5) and restarting the server after
each adapter is removed.
If the problem persists, have the
system serviced.
HDD
A hot-swap hard disk drive has failed
on bus 1.
1. Check the error log for additional
information. If the error log
indicates a temperature problem
and the fans are working correctly,
have the system serviced.
2. If the amber Hard Disk Status LED
on one of the hot-swap hard disk
drives is on, and you have an
optional RAID adapter installed,
refer to the documentation provided
with the adapter for more
information.
NMI
A nonmaskable interrupt occurred.
1. If the PCI BUS A or PCI BUS B
LED is on, follow the instructions
for those LEDs.
2. If the PCI BUS A or PCI BUS B
LED is not on, restart the server.
If the problem persists, have the
system serviced.
Chapter 6. Solving problems
155
Summary of Contents for eServer 240 xSeries
