Failed diagnostic messages
The following tables display the primary hardware failure messages that the
diagnostic programs might display.
Function: core system messages (001)
Result
Test-specific string
Failed
Processor daughterboard, I/O function card, or I/O board.
Action:
Have the system serviced.
Function: video system messages (005)
Result
Test-specific string
Failed
Processor daughterboard, I/O function card, or I/O board.
Action:
Have the system serviced.
Function: serial port messages (011)
Result
Test-specific string
Failed
Built-in serial port on I/O function card.
Action:
Have the system serviced.
Function: parallel port messages (014)
Result
Test-specific string
Failed
Built-in parallel port on I/O function card.
Action:
Have the system serviced.
Function: USB port interface messages (015)
Result
Test-specific string
Failed
I/O function card or I/O board.
Action:
Have the system serviced.
Function: PCI interface messages (020)
Result
Test-specific string
Failed
Tab on PCI Hot Swap slot #
xx
has failed.
Where
xx
represents a hot-plug PCI slot number.
Action:
Make sure that the tab and latch on the hot-plug PCI slot
xx
are closed
correctly.
Note:
For normal operation, when a hot-plug PCI slot is enabled and a hot-plug
PCI adapter is installed, the Power LED for the hot-plug PCI slot will be on
and the Attention LEDs will be off.
If the problem persists, have the system serviced.
Failed
I/O function card or I/O board.
Action:
Have the system serviced.
Chapter 6. Solving problems
123
Summary of Contents for eServer 370 xSeries
