Result
Test-specific string
Failed
Test setup error: Damaged BIOS in ROM.
Action:
Update the BIOS. See Chapter 7, “Getting help, service, and information”
on page 163 for information about obtaining updates.
If the problem persists, have the system serviced.
Function: system cache messages (202)
Result
Test-specific string
Failed
Test setup error: No L2 cache detected on processor socket
xx
or BIOS setup
problem.
Where
xx
represents a processor socket.
Action:
1. Update the BIOS and run the diagnostic program again. See Chapter 7,
“Getting help, service, and information” on page 163 for information on
obtaining updates.
2. If the problem persists, replace the processor.
If the problem persists, have the system serviced.
Warning
Test setup error: Cache is disabled. Use system setup to enable before retrying the
test.
Action:
Use the
Cache Control
selection in the Advanced Setup menu of the
Configuration/Setup Utility program to enable the cache. (See “Advanced setup” on
page 28.)
If the problem persists, have the system serviced.
Failed
Test setup error: Damaged DMI BIOS. Information in BIOS is not as expected.
Action:
Update the BIOS. See Chapter 7, “Getting help, service, and information”
on page 163 for information about obtaining updates.
If the problem persists, have the system serviced.
Failed
Test setup error: BIOS cannot access VPD information.
Action:
Update the BIOS. See Chapter 7, “Getting help, service, and information”
on page 163 for information about obtaining updates.
If the problem persists, have the system serviced.
Failed
Test setup error: Unknown hardware problem associated with processor in socket
number
xx
.
Where
xx
represents a processor socket.
Action:
1. Update the BIOS. See Chapter 7, “Getting help, service, and information” on
page 163 for information about obtaining updates.
2. If the problem persists, replace the processor and run the diagnostic program
again.
If the problem persists, have the system serviced.
Failed
Test setup error: Cannot allocate memory due to unknown memory problem.
Action:
Have the system serviced.
128
xSeries 370 User's Reference
Summary of Contents for eServer 370 xSeries
