![background image](http://html2.mh-extra.com/html/ibm/eserver-370-xseries/eserver-370-xseries_user-reference-manual_4074194147.webp)
POST beep code table
Beep Code
Description
1-1-2
1-1-3
1-1-4
1-2-1
1-2-2
1-2-3
2-1-1
2-1-2
2-1-3
2-1-4
2-2-1
2-2-2
2-2-3
2-2-4
2-3-1
2-3-2
2-3-3
2-3-4
2-4-1
3-1-1
3-1-2
3-1-3
3-1-4
3-2-1
3-2-2
3-2-3
3-2-4
Processor register test has failed.
Complementary metal oxide semiconductor (CMOS) write/read test has failed.
BIOS flash EEPROM checksum has failed.
Programmable-interval-timer test has failed.
DMA initialization has failed.
DMA page register write/read test has failed.
Secondary DMA register test has failed.
Primary DMA register test has failed.
Primary interrupt-mask register test has failed.
Secondary interrupt-mask register test has failed.
Interrupt vector loading test has failed.
Keyboard controller test has failed.
CMOS power failure and checksum checks have failed.
CMOS configuration information validation has failed.
Screen initialization has failed.
Screen memory test has failed.
Screen retrace tests have failed.
Search for video ROM has failed.
Screen test indicates the screen is inoperable.
Timer tick interrupt test has failed.
Interval timer channel 2 test has failed.
RAM test has failed above address hex 0FFFF.
Time-of-day clock test has failed.
Serial port test has failed.
Parallel port test has failed.
Math coprocessor test has failed.
Comparison of CMOS memory size against actual has failed.
Action:
Have the system serviced.
1-2-4
1-3-1
1-3-2
3-3-1
RAM refresh verification has failed.
First 64 KB RAM test has failed.
First 64 KB RAM parity test has failed.
A memory size mismatch has occurred.
Action:
Reseat the DIMMs.
If the problem persists, have the system serviced.
3-3-2
Critical System Management bus error.
Action:
Disconnect the server from all electrical sources, wait for 30 seconds, and
reconnect the server to the electrical sources. If the processor error LED on the
Advanced System Management PCI adapter lights continuously, have your system
serviced. (See “Advanced System Management PCI adapter component locations”
on page 101 for the location of the Processor Error LED.)
POST error codes and messages
The following table shows the error messages that can appear on the screen during
the power-on self-test (POST).
Notes:
1. In addition to the actions given for the messages, see “Troubleshooting” on
page 148 for general troubleshooting activities.
2. The actions for some of the messages require you to run the
Configuration/Setup Utility program. For information on using the
Configuration/Setup Utility program, see “Using the Configuration/Setup Utility
main menu” on page 21.
Chapter 6. Solving problems
131
Summary of Contents for eServer 370 xSeries
