825 system unit
To access the PCI card location, you need to remove the back cover and the side
cover:
__ 1.
Place your hand near the bottom of the back cover and lift up and out.
__ 2.
Remove the right side cover (view from back) by loosening the thumbscrews
and sliding the cover from front to back until it stops.
__ 3.
Pull the cover out.
830, 840, 870, 890, SB2, SB3, 5074, 5079, and 5094 units
To access the PCI card location, you need to open the back cover:
v
A
Open the back cover.
v
B
Remove the back cover.
v
Remove the PCI card access plate.
10
Upgrading the System Unit from Operations Console to Twinaxial Console (5540) V5R2
