v
825 system unit: C07
v
830, 840, SB2, SB3 system unit: C04, C06, C07, C09, or C10
v
870 or 890 system unit: C04, C06, C07, C08, or C09
__
No
: Continue with the next step.
__
Yes
: Go to “Connecting the Twinaxial cable attachment and Twinaxial
__ 5.
Before you remove the card from the system unit, you need to see if you
have an open position to install the card you removed in a different
position.
Look at the PCI card area. Are there any open positions?
__
Yes
: Go to the Install PCI Card topic in the
Information Center
for
instructions on
Moving a card in your iSeries
.
__
No
: Use the following to help determine card placement.
– Go to the Install PCI Card topic in the
Information Center
– Contact your authorized service provider or your authorized
dealer
__ 6.
Attention:
Adapter cards are fragile.
Use static strap when handling
,
handle only by the edges, and keep fingers off printed circuit area.
__ 7.
Install the new 2746 adapter card in one of the following positions:
v
270 system unit: C06
v
810 system unit: C07
v
820 system unit: C04 or C11
v
825 system unit: C06
v
830, 840, SB2, SB3 system unit: C04, C06, C07, C09, or C10
v
870 or 890 system unit: C04, C06, C07, C08, or C09
__ 8.
Does your unit have screws to secure the cards?
__
No
: Continue with the next step.
__
Yes
: Remove the screw from the card position where you plan to
install the card.
Upgrade Operations Console to twinaxial console
3
