2. Turn off the server and disconnect all power cords and external cables
(“Turning off the server” on page 9); then, remove the server cover (see
“Removing the server left-side cover and bezel (tower model)” on page 51 or
“Removing the server top cover and bezel (rack configuration)” on page 53).
3. Open the cover on the air-baffle assembly. (See the illustration following step 3
on page 79, if needed.)
Note:
It is not necessary to remove the air-baffle assembly to perform this
step.
4. Locate the second microprocessor socket (connector U27) on the system
board.
5. Remove the microprocessor baffle from the microprocessor socket.
6. If the second microprocessor socket is covered with protective film, peel and
remove the film.
DIMMs
VRM 2
Captive screws
Heatsink 2
Microprocessor 2
Microprocessor
baffle
Microprocessor-
release lever
7. Install a VRM in the corresponding VRM connector (J1):
a. Center the VRM over the connector. Make sure that the VRM is oriented
and aligned correctly.
b. Carefully but firmly push down the VRM clip handle to seat the VRM in the
connector.
c. Make sure that the VRM clip locks on the VRM connector at both sides.
8. Install the microprocessor:
a. Touch the static-protective package containing the new microprocessor to
any
unpainted
metal surface on the server; then, remove the
microprocessor from the package.
b. Pull out and lift up on the microprocessor-release lever to unlock the
microprocessor socket.
c. Center the microprocessor over the microprocessor socket. Align the
triangle on the corner of the microprocessor with the triangle on the corner
of the socket and carefully press the microprocessor into the socket.
82
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide
Summary of Contents for eServer xSeries 235 Type 8671
