background image

Welcome. . .

Thank you for buying an
IBM xSeries server.

This server
contains information for setting
up and configuring your server.

For detailed information about
your server, view the publications
on the

You can also find the most
current information about your
server on the IBM Web site at:
http://www.ibm.com/pc/support

Your server

is based on the X-Architecture
technology, and it features
superior performance, availability,
and scalability.

Documentation CD.

Installation Guide

Go to the Server Support

flow chart

Cable the server

and options

Start the server

Install options:
• Drives
• Microprocessors
• Adapters
• Memory

Did the server

start correctly?

Yes

No

Use ServerGuide™

to set up and

configure hardware

Did configuration

complete?

Use

ServerGuide to

install operating

system?

Install applications,
such as IBM systems
management software
and IBM ServeRAID
programs

System is ready to use.

Go to the Server Support

flow chart to register

and profile your server.

Go to the Web for instructions,
http://www.ibm.com/pc/support

No

Yes

Yes

No

Installation Guide

Install the server in

the rack, if required

xSeries 345

Type 8670

 

Summary of Contents for eServer xSeries 345 Type 8670








































































Reviews: