manualshive.com logo in svg

IBM Flex System x440 Compute Node, Installation And Service Manual

The IBM Flex System x440 Compute Node offers exceptional performance and scalability for demanding workloads. To ensure a seamless setup and maintenance process, an installation and service manual is available for free download from our website. Maximize the potential of this powerful product with our comprehensive user manual.

Share
Download
background image

the compute node. In addition, the fault LED on the chassis system LED
panel is lit. You can check the CMM event log to determine the source of
the condition. For more information, see “Viewing event logs without
restarting the compute node” on page 64“Viewing event logs without
restarting the compute node” on page 56. See “Light path diagnostics
LEDs” on page 59 for more information about the LEDs on the compute
node.

The fault LED turns off only after the error is corrected.

Note:

When the fault LED turns off, you should also clear the IMM event

log. Use the Setup utility to clear the IMM event log.

Check log LED

When this yellow LED is lit, it indicates that a condition that causes an
event to be logged in the event log has occurred. To view the IMM2 event
log see “IMM event log” on page 63

The check log LED can be turned off through the CMM

led

command, the

CMM web interface, or IBM Flex System Manager management software
(if installed).

v

For more information about the CMM

led

command, see the "IBM Flex

System Chassis Management Module: Command-Line Interface
Reference Guide" at http://ralfss21.raleigh.ibm.com:8099/help/topic/
com.ibm.acc.cmm.doc/cli_command_led.html.

v

From the CMM web interface, select

Compute Nodes

from the

Chassis

Management

menu. For more information, see the "IBM Flex System

Chassis Management Module: User's Guide" athttp://
publib.boulder.ibm.com/infocenter/flexsys/information/topic/
com.ibm.acc.cmm.doc/cmm_user_guide.html. All fields and options are
described in the CMM web interface online help.

v

For more information about IBM Flex System Manager management
software, see the "IBM Flex System Manager Software: Installation and
Service Guide" at http://ralfss21.raleigh.ibm.com:8099/help/topic/
com.ibm.acc.8731.doc/product_page.html.

Notes:

1.

Alternatively, you can use the

CMM_INDICATES_ITE_ERROR_N

command to light the check log LED. See the "IBM Flex System Chassis
Management Module: Command-Line Interface Reference Guide" at
http://ralfss21.raleigh.ibm.com:8099/help/topic/
com.ibm.acc.cmm.doc/cmm_cli_guide.html for more information.

2.

You can check the CMM event log to determine the source of the
condition. For more information, see “Viewing event logs without
restarting the compute node” on page 64.

Identify LED

The system administrator can remotely light this blue LED to aid in
visually locating the compute node. When this LED is lit, the identify LED
on the IBM Flex System chassis is also lit. The identify LED can be lit and
turned off through the CMM

led

command, the CMM web interface, or

IBM Flex System Manager management software (if installed).

v

For more information about the CMM

led

command, see the "IBM Flex

System Chassis Management Module: Command-Line Interface
Reference Guide" at http://ralfss21.raleigh.ibm.com:8099/help/topic/
com.ibm.acc.cmm.doc/cli_command_led.html.

Chapter 1. Introduction

11

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Flex System x440 Compute Node

NEC Univerge SV9300 Programming Manual preview
Univerge SV9300
Brand: NEC Pages: 47
NEC Univerge SV9100 Manual preview
Univerge SV9100
Brand: NEC Pages: 766
SMC Sierra Monitor FS-8704-14 Driver Manual preview
FS-8704-14
Brand: SMC Sierra Monitor Pages: 42
IBM Netfinity Series Installation Instructions Manual preview
Netfinity Series
Brand: IBM Pages: 44
Patton SN4524 Setup Manual preview
SN4524
Brand: Patton Pages: 15
Fujitsu PRIMEQUEST 3800E System Configuration Manual preview
PRIMEQUEST 3800E
Brand: Fujitsu Pages: 38
Fujitsu PRIMERGY B900 Reference Manual preview
PRIMERGY B900
Brand: Fujitsu Pages: 36
Fujitsu Primergy BX2560 M1 Operating Manual preview
Primergy BX2560 M1
Brand: Fujitsu Pages: 68
Fujitsu PRIMEQUEST 3000 Series Getting Started Manual preview
PRIMEQUEST 3000 Series
Brand: Fujitsu Pages: 44
Fujitsu PRIMERGY User Manual preview
PRIMERGY
Brand: Fujitsu Pages: 56
Fujitsu PRIMEQUEST 2800B3 System Configuration Manual preview
PRIMEQUEST 2800B3
Brand: Fujitsu Pages: 28
Fujitsu PRIMERGY 870 Technical Manual preview
PRIMERGY 870
Brand: Fujitsu Pages: 35
Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Function Manual preview
PRIMERGY 10/40GbE Connection Blade 18/8+2
Brand: Fujitsu Pages: 71
Fujitsu PRIMERGY 300 Operating Manual preview
PRIMERGY 300
Brand: Fujitsu Pages: 94
Fujitsu PRIMEQUEST 3800E2 System Configuration Manual preview
PRIMEQUEST 3800E2
Brand: Fujitsu Pages: 42
Fujitsu PRIMEQUEST 420 Installation Planning Manual preview
PRIMEQUEST 420
Brand: Fujitsu Pages: 104
Fujitsu PRIMERGY BX400 S1 Operating Manual preview
PRIMERGY BX400 S1
Brand: Fujitsu Pages: 136
Fujitsu PRIMERGY 200 Operating Manual preview
PRIMERGY 200
Brand: Fujitsu Pages: 94

Brands by name

Popular brands

Load more brands