IBM Flex System x440 Compute Node Installation And Service Manual Download | Manualshive

Page: 574 / 584

background image

Documentation format

The publications for this product are in Adobe Portable Document Format (PDF)
and should be compliant with accessibility standards. If you experience difficulties
when you use the PDF files and want to request a web-based format or accessible
PDF document for a publication, direct your mail to the following address:

Information Development
IBM Corporation
205/A015
3039 E. Cornwallis Road
P.O. Box 12195
Research Triangle Park, North Carolina 27709-2195
U.S.A.

In the request, be sure to include the publication part number and title.

When you send information to IBM, you grant IBM a nonexclusive right to use or
distribute the information in any way it believes appropriate without incurring any
obligation to you.

Telecommunication regulatory statement

This product may not be certified in your country for connection by any means
whatsoever to interfaces of public telecommunications networks. Further
certification may be required by law prior to making any such connection. Contact
an IBM representative or reseller for any questions.

Electronic emission notices

When you attach a monitor to the equipment, you must use the designated
monitor cable and any interference suppression devices that are supplied with the
monitor.

Federal Communications Commission (FCC) statement

Note:

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate the equipment.

562

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

«
...
572
573
574
575
576
...
»

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Flex System x440 Compute Node

Brand: Raritan Pages: 99

Brand: IOGear Pages: 44

FusionServer G8600 V7

Brand: xFusion Digital Technologies Pages: 112

UniServer R4300 G6

Brand: H3C Pages: 542

ProLiant DL380 Gen9

Brand: HPE Pages: 8

Brand: Time Machines Pages: 24

Brand: Dell Pages: 25

EMC PowerEdge R340

Brand: Dell Pages: 92

EMC PowerEdge R640

Brand: Dell Pages: 78

Brand: Dell Pages: 25

EMC PowerEdge R740

Brand: Dell Pages: 172

Brand: Dell Pages: 186

Brand: Dell Pages: 110

Brand: Dell Pages: 138

EMC Connectrix EC-1700 Series

Brand: Dell Pages: 110

EMC PowerEdge T440

Brand: Dell Pages: 156

EMC PowerEdge C6420

Brand: Dell Pages: 92

Brand: Dell Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands