IBM High IOPS Adapter - Hardware User Guide 2.2.3
|
__________________
__
__
13
1.
2.
3.
Locate the half-height bracket in your IBM High IOPS Adapter package:
Attention
Use care in removing the retaining screws. Do not twist or pull on the bracket until both screws are
out as this can cause damage to the components.
To prevent damage to the IBM High IOPS Adapter, use only a Philips #1 tip screwdriver. Remove the two
screws holding the full-height bracket to the IBM High IOPS Adapter in the order shown.
Remove the bracket carefully from the device.