IBM High IOPS Adapter - Hardware User Guide 2.2.3
|
__________________
__
__
14
4.
5.
Align the LEDs on the IBM High IOPS Adapter with the holes in the half-height bracket:
NOTE
Be sure the bracket tabs are on the backside of the device (opposite of heat sink).
Attach the half-height bracket using a Philips #1 tip screwdriver to tighten the two screws:
Attention
Do not over-tighten! This can cause damage to the device.
to Step 2 of the Hardware Installation section to complete the install.
External Hard Drive LED (optional)
The IBM High IOPS Adapter includes a two-pin LED pinout for attaching to an external HDD access light. To attach
the LED: