IBM High IOPS Adapter - Hardware User Guide 2.2.3
|
__________________
__
__
12
8.
9.
10.
11.
Secure the IBM High IOPS Adapter's retaining bracket using a screw or lever (depending on how your
hardware is configured):
Replace the computer's access panel.
Plug in the power cable and turn on the computer.
Your operating system may detect the IBM High IOPS Adapter and ask if you want it to install a hardware
driver for the device. In that case, click
.
Cancel
You are now ready to install the driver and utilities software. See the IBM High IOPS Adapter user guide based on
your operating system.
Half-Height Bracket Installation
For half-height installation (such as in low-profile systems), you need to replace the full-height retaining bracket with
the included half-height bracket.
Attention
Electrostatic discharge (ESD) can damage electronic components. Be sure you are properly grounded
before starting any hardware installation procedure.