background image

Statement of limited warranty: TT Systems LLC warrants that for a period of one year from the date of purchase that this product 1)
is free from defects in materials and workmanship and 2) conforms to its specifications. If this product does not function as warrant-
ed during the warranty period, TT Systems LLC, at its option, will either replace this product with one that is functionally equivalent or
will refund your purchase price. These are your exclusive remedies under this warranty. Please call 1-800-955-1009 for warranty 
service.

This product is distributed and sold by TT Systems LLC, 7 Odell Plaza, Yonkers, New York 10701, the official licensee for this 
product. IBM, the IBM logo trademarks and the IBM trade dress  are owned by International Business Machines Corporation and are
used under a license from IBM. IBM does not manufacture this product and provides no warranty or support for this product. Please
contact TT Systems LLC at 1-800-955-1009 for all questions/comments and service or support related to this product.

TT Systems LLC warrants that the IBM-3415 sold by TT Systems LLC within the continental limits of the United States, Hawaii and
Alaska, are free from defects in materials and workmanship under normal use and service for 1 year. This warranty is applicable only
to the original purchaser of the IBM-3415, when accompanied by a sales receipt stating the date of purchase and name of the 
company from which purchased. This warranty is in lieu of and excludes all other warranties, expressed or implied, including any
implied warranty of merchantability or fitness, and of any other obligation on the part of TT Systems LLC.

If the IBM-3415 shall prove to be defective, then TT Systems LLC shall either replace, repair or refund the purchase price of the 
IBM-3415 at its discretion as follows: At no cost to the original purchaser except shipping charges, within 90 days of the date of 
purchase. 

From 91 days to 365 days, you may return the IBM-3415 to TT Systems LLC at the following address: TT Systems LLC, 4 Executive
Plaza, Yonkers, New York 10701. Shipping charges are at the customer’s expense. Please include a copy of your sales receipt and
a check or money order made out to TT Systems LLC for the amount of $14.50 to cover shipping and handling.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not
allow limitations on how long an implied warranty lasts and/or do not allow the exclusions or limitations of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. There is no informal dispute settlement mechanism available.
This warranty will be voided by misuse, improper physical environment, accident, or improper maintenance by you. 

THIS WARRANTY REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN THAT
EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD.  NO WARRANTIES APPLY AFTER
THAT PERIOD.

Circumstances may arise where, because of a default on TT Systems LLC's part or other liability, you are entitled to recover 
damages from TT Systems LLC. In each such instance, regardless of the basis on which you are entitled to claim damages from TT
Systems LLC (including fundamental breach, negligence, misrepresentation, or other contract or tort claim), TT Systems LLC is only
liable for: 1. Damages for bodily injury (including death) and damage to real property and tangible personal property; and 2. The
amount of any other actual direct damages or loss, up to the greater of $500 or the price paid for this product.

UNDER NO CIRCUMSTANCES IS TT SYSTEMS LLC OR IBM LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR LOSSES OR DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); (2) LOSS OF,
OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY
ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF TT SYSTEMS LLC OR IBM ARE
INFORMED OF THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.

TT Systems LLC reserves the right to make changes in the design of the IBM-3415 and to make additions or improvements to the
IBM-3415 without incurring any obligation to modify any IBM-3415 previously sold.

21

WARRANTY

BATTERIES:  CAUTION
To Reduce the risk of fire or injury to persons, read and follow these instructions:

For the cordless handset, use only 3.6V 600mAh Nickel Cadmium (Ni-Cd), RDAA600 cordless telephone replace-
ment battery packs. (Included).

• 

Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special 
disposal instructions. 

• 

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or
skin. It may be toxic if swallowed.

• 

Exercise care in handling batteries in order not to short the battery with conducting materials such as rings,
bracelets, and keys. The battery or conductor may overheat and cause burns.

Do not attempt to rejuvenate the batteries identified for use with this product by heating them. Sudden release of
the battery electrolyte may occur causing burns or irritation to eyes or skin.

• 

When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of
batteries can cause charging, and that may result in leakage or explosion.

Remove the batteries from this product if the product will not be used for a long period of time (several months or
more) since during this time the battery could leak in the product.

Do not store this product, or the batteries identified for use with this product, in high temperature  areas. Batteries
that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from 
condensation during storage and defrosting.

Batteries should be stabilized at room temperature prior to use after cold storage.

4

BATTERY CAUTIONARY INSTRUCTIONS

Summary of Contents for IBM-3415

























Reviews: