Status menu
This is a read-only window for informational purposes.
To display the status window, click Show status from the menu, and then
click the left or right navigation button. To close the window, click the left or
right navigation button.
Display Audio Image Controls Language Status
Show status
Lamp hours used
Computer resolution
Horizontal refresh rate
Vertical refresh rate
Mute status
Source
Software version
Startup screen version
Boot version
CableWizard version
1.0
0039
1024x768
60.03 KHz
75.04 Hz
off
computer 1 analog
1.0
1.0
1.0
>
Lamp hours used
This shows how many hours the current lamp has been in use. The counter
starts at zero hours and counts each hour the lamp is in use. After 2000 hours
of use, the message “Change Lamp” temporarily appears on the screen when
the projector is turned on. Change the lamp within 50 hours. After 2050 hours,
the LED flashes orange and the lamp will not light. See “Replacing the
projection lamp” on page 27 for details.
Computer resolution
This shows your computer resolution setting. To change this, go to your
computer Control Panel and adjust the resolution in the Display tab. See your
computer documentation for details.
Horizontal refresh rate
This shows the time period that one horizontal line is displayed.
Vertical refresh rate
The time period that one video frame is displayed.
Mute status
This shows whether the audio is muted.
Installation and user’s guide
25
