Argecy Computer Corporation 248-324-1800
183
51
Removing printer or flash memory
If necessary, refer to the
Setup Guide
for instructions on accessing the printer system board.
1
Locate the memory option you want to remove.
W
ARNING
:
Electronic components are easily damaged by static electricity. Touch something
metal on the printer before you touch the memory option.
2
Push out on the latches at each end of the connector.
3
Pull the memory option out of the connector.
4
Place the memory option in its original packaging. If you did not save the packaging, wrap it in
paper and store it in a box.
5
If you need to install a replacement memory option or other option on the system board, refer
to the
Setup Guide
.
6
Refer to the
Setup Guide
for instructions on closing the printer system board cover.
Latch
