Using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
•
From MarkVision
TM
Professional, the printer software, or the control panel, set the Paper Type to Transparency. For
more information, see “Setting the Paper Size and Paper Type” on page 35.
•
Feed transparencies from the standard tray (Tray 1) or the multipurpose feeder.
•
Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure
transparencies are able to withstand temperatures up to 180°C (356°F) without melting, discoloring, offsetting, or
releasing hazardous emissions.
•
Use transparencies that are 0.12–0.14 mm (4.8–5.4 mil) in thickness or 161–179 g/m
2
in weight. Print quality and
durability depend on the transparencies used.
•
To prevent print quality problems, avoid getting fingerprints on the transparencies.
•
Before loading transparencies, fan the stack to prevent sheets from sticking together.
Using envelopes
Print samples on the envelopes being considered for use before buying large quantities. For information on loading
envelopes, see “Loading the multipurpose feeder” on page 30 or “Loading the manual feeder” on page 32.
When printing on envelopes:
•
From the control panel, set the Paper Source based on the source in use. From the control panel, the printer software,
or MarkVision Professional, set the Paper Type to Envelope, and select the envelope size. For more information, see
“Setting the Paper Size and Paper Type” on page 35.
•
Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure the envelopes
can withstand temperatures up to 180°C (356°F) without sealing, wrinkling, curling excessively, or releasing hazardous
emissions.
•
For the best performance, use envelopes made from 90 g/m
2
(24 lb bond) paper. Use up to 105 g/m
2
(28 lb bond)
weight for envelopes as long as the cotton content is 25% or less. All-cotton envelopes must not exceed 90 g/m
2
(24 lb bond) weight.
•
Use only new envelopes.
•
To optimize performance and minimize jams, do not use envelopes that:
–
Have excessive curl or twist
–
Are stuck together or damaged in any way
–
Have windows, holes, perforations, cutouts, or embossing
–
Have metal clasps, string ties, or folding bars
–
Have an interlocking design
–
Have postage stamps attached
–
Have any exposed adhesive when the flap is in the sealed or closed position
–
Have bent corners
–
Have rough, cockle, or laid finishes
•
Adjust the width guide to fit the width of the envelopes.
Note:
A combination of high humidity (over 60%) and the high printing temperature may wrinkle or seal envelopes.
Using labels
Note:
Vinyl labels are not supported on this product. Use only paper labels.
When printing on labels:
•
From the printer software, MarkVision Professional, or the control panel, set the Paper Type to Labels.
•
Use only letter-, A4-, and legal-size label sheets.
39
Summary of Contents for InfoPrint 1634
