127
3.Beginning with section #1, find the box
which shows no color in the spaces
between the black lines, and make a note
of its number.
Not this:
This:
4.The display now reads ADJUST #1, with
the number 0 on the second line. Press
©
©
©
©
©
to increase the number or
§
§
§
§
§
to decrease
it, until the second line reads the number
of the box which shows no color in the
spaces.
5.Press
Menu 2
to move to section #2
(display: ADJUST #2), and repeat the
process to select the box which shows no
color in the spaces between the black
lines.
Level 2 menu
6.Continue to select the correct boxes for all
sections through section #9. If you need to go
back, hold
Menu 1
down to move backwards
through the menu.
7.When you are satisfied with your selections,
move through the menu until PRINT EXECUTE
appears.
8.Press
Enter
. Another test pattern prints and the
display shows EXIT.
9.Check the results. This time the box where no
color shows should be box 0 in each section. If it
is, press
Online
to finish the adjustment. If it is
not, press
Menu 2
and repeat the process.
Summary of Contents for Infoprint Color 8
