The
Installing Modem Drivers
window opens and the Wizard finds a
Lucent Win Modem.
17.
Restart the computer to finish the Lucent Win Modem installation.
Installing the Ethernet and modem device drivers in
Windows 95
To install the PCI Ethernet Controller device driver and the Lucent Win
Modem device driver in Windows 95, do the following:
Note:
You will need your Windows 95 installation CD or diskette to install the
device driver.
For Windows 95 OSR0 or OSR1
1.
Start Windows 95. The New Hardware Found window for the PCI
Ethernet Controller opens.
2.
Click
Driver
from the disk provided by hardware manufacturer.
3.
Click
OK.
4.
Insert the device drivers for the CD-ROM.
5.
When you are prompted to specify the path where the device driver is
located, enter
x:
where
x
is the drive letter of the CD-ROM drive.
6.
Click
OK.
7.
Follow the instructions on the screen.
8.
When you are prompted to specify the path that the device driver is in,
type
x
where
x
is the drive letter of the CD-ROM drive.
9.
Follow the instructions on the screen.
10.
When you are prompted, restart your computer to complete the PCI
Controller Modem device driver installation.
Note:
If you cannot connect to a server, or if Windows 95 reports an error
after you double-click
Network Neighborhood
, do the following:
v
Make sure that you are using the device drivers from the driver
CD that came with the Combo card.
v
Make sure that the device driver is installed and the protocols are
bound. Check the Device Properties list for trouble indicators (if
there is trouble, an X or ! symbol appears beside the icon.)
v
Ask your LAN administrator whether you need to install
additional networking software.
11.
Restart Windows. The New Hardware Found window or the Update
Device Driver Wizard window for the PCI Card opens.
12.
Click
Do not install a driver.
13.
Insert the device drivers CD into the CD-ROM.
1-4
Intel
®
PRO/100 SP Mobile Combo Adapter: User’s Guide
