IBM iSeries Series Analyze Hardware Problems (System Reference Codes Download

Page: 235 / 306

Reference Code

Description/Action Perform all actions before exchanging Failing Items

Failing Item

6905

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There is no valid kernel to load for the specified IPL Mode of
the guest partition. Either the kernel is not valid or there is not a kernel in
the selected IPL Mode. Verify that the kernel specified to load is valid and
the IPL mode specified is where the kernel is located. If the problem
persists then record all words of the SRC and contact your next level of
support.

LPARCFG

6910

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A storage management problem occurred loading the guest
partition. Record all the words of the SRC and contact your next level of
support.

LPARCFG

6920

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A problem occurred while loading the guest partition. Record
all the words of the SRC and contact your next level of support.

LPARSUP

6930

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A problem occurred while loading the guest partition. Record
all of the words in the SRC and contact your next level of support.

LPARCFG

7111

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Load-source device driver does not point to an IOP hardware
driver.

Read and understand the information about logical partitions. See the

iSeries Service Functions

information.

Initiate a Primary partition main storage dump, and contact your next level
of support.

FI00099

7115

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The IOP identified in word 5 is not reporting to the secondary
partition. Removing an IOP hardware driver (not the load source for the
current IPL) from the Primary partition failed. The IPL will continue, but
the secondary partition will not be able to establish connections to this IOP.

Word 3: Bus, Word 4: Board, Word 5: Card.

FI00099
LPARSUP

7117

A problem occurred during the IPL of a secondary partition

The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The IOP identified in word 5 is not reporting to the secondary
partition. Removing the IOP hardware driver that is associated with the
current load-source has failed. The IPL will fail.

Read and understand the information about logical partitions. See the

iSeries Service Functions

information.

Record the SRC. The location of the IOP is in SRC words 3, 4 and 5. Word
3: Bus, Word 4: Board, Word 5: Card.

FI00099
LPARSUP

B2xx

System Reference Codes

231