Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
699C
Wrap plug is installed on Bus Expansion Adapter card
This reference code is for information only. It indicates the presence of a
wrap plug on the local optical link card.
69A8
Informational bus reference code
This reference code is for information only and might include the
following:
v
Optical speed encode
v
Broken optical links now operational
v
Other information
69B8
Bus hardware configuration problem
The optical bus cabling is not connected correctly.
Perform BUS-PIP1.
FI00187
AJDG301
69C1
A failure occurred on another system
Perform BUS-PIP1.
FI01040
FI00206
FI00182
AJDG301
69C2
Information only, no service action required. HSL OptiConnect normal
connection to another system or partition.
This reference code is informational only.
HSL Opticonnect has established connection normally. The local system or
partition is participating in HSL Opticonnect with other systems or
partitions on the same HSL loop.
69C3
Information only, no service action required. Opticonnect normal remote
disconnection from OptiConnect participation.
This reference code is informational only.
HSL Opticonnect disconnected normally from a remote node. The local
system or partition has stopped participating in HSL Opticonnect with the
remote system or partition on the same HSL loop. Possible reasons include:
v
A remote system or partition went off line due to a normal power off or
disable of HSL Opticonnect
69C5
I/O processor failure
The OptiConnect/400 card which connects this system to another system
has failed. The failing card is located in an I/O processor card slot.
Perform BUS-PIP1.
FI00206
FI01040
AJDG301
B6xx (including A6xx)
System Reference Codes
289
