16 character line of function 11 (Word 4). Card locations can be found using the
16 character address. See SRC Address Formats.
3.
Find the unit reference code in the following table.
For more on the Failing Item column entries, see Table 2. Failing Items Details,
which follows the reference code table below.
Table 1. (2760, 2743, 5700, 5701) Reference Codes
Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
B9A0
I/O adapter hardware error detected
FI00719
FI00718
AJDGP01
Table 2. Failing Items Details
Failing Item
Description
Document Description
AJDGP01
LIC - Input/Output Processor Licensed Internal
Code
Service Functions; APAR or LICTR
(281x) – Reference Codes
1.
Look at characters 5 through 8 of the top 16 character line of function 11 (4
rightmost characters of word 1). These 4 characters are the unit reference code.
2.
Look at the last 8 characters of the top 16 character line of function 12 (word 3).
These 8 characters are the direct select address of the card (BBBBCcbb). The
unit address portion of the card address is characters 1 through 8 of the bottom
16 character line of function 11 (Word 4). Card locations can be found using the
16 character address. See SRC Address Formats.
3.
Find the unit reference code in the following table.
Table 1. (281x) Reference Codes
Reference Code
Description/Action Perform all actions before exchanging Failing Items
Failing Item
B910
I/O adapter hardware error detected
(B427) System Processor Reference Codes
The system processor detected a failure.
These reference codes are for the Models 270, 800, 810, 820, and 825.
Collect data from Functions 11, 12, and 13 of the system panel, or words 1 through
9 from the Main Store Dump (MSD) screen. This SRC, beginning with
″
B4
″
, may
contain up to five FRUs. Eight characters of this data represent a single FRU. The
FRU characters have two parts: a unit reference code, and a type number. The
location of this data is shown below:
PANEL FUNC 11:
B4xx____
RC01TP01
RC02RC03
RC04RC05
PANEL FUNC 12:
DATA0012
DATA0013
2742
238
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
