Cleaning the mouse
If the pointer on the screen does not move smoothly with the
mouse, you might need to clean the mouse.
1. Turn off the server.
2. Disconnect the mouse cable from the server.
3. Turn the mouse upside down. Unlock the retainer on the
bottom of the mouse by moving it in the direction indicated by
the arrow on the retainer.
4. Turn the mouse right-side up, and the retainer and ball will
drop out.
5. Wash the ball in warm, soapy water, and dry it well.
6. Using a damp cloth, wipe the outside of the mouse and the
retainer. Be sure to wipe the rollers inside the mouse.
7. Insert the ball and retainer. Lock the retainer by moving it in
the opposite direction of the arrow.
8. Reconnect the mouse cable to the server.
Replacing the battery
Your server has a special type of memory that maintains the date,
time, and the settings for built-in features, such as serial- and
parallel-port assignments (configuration). A battery keeps this
information active when you turn off the server.
64
Netfinity 3500 M10 User's Handbook
Summary of Contents for Netfinity 3500 M10
