Socket
7
Socket
7
Socket
7
Eject/Load Button
Tray
Emergency-Eject Hole
CD-ROM Drive
In-Use Light
Handling:
When handling a CD, follow these
guidelines:
Hold the CD by its edges. Do not touch the surface.
To remove dust or fingerprints, wipe the CD from the
center to the outside. Wiping the CD in a circular
direction might cause loss of data.
Do not write or stick paper on the CD.
Do not scratch or mark the CD.
Do not place or store the CD in direct sunlight.
Do not use benzene, thinners, or other cleaners to
clean the CD.
Do not drop or bend the CD.
Loading:
To load and unload a CD into a CD-ROM
drive:
1. Press the Eject/Load button. The tray slides out of
the drive. (Do not manually force the tray open.)
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or
by gently pushing the tray forward. When the tray is
closed, the CD-ROM drive in-use light on the front of
the drive will activate to indicate that the drive is in
use.
4. To eject the CD, press the Eject/Load button. When
the tray slides out, carefully remove the CD.
5. Close the tray by pressing the Eject/Load button, or
by gently pushing the tray forward.
Notes
1. If the tray does not slide out of the drive when
you press the Eject/Load button, insert one end
of a large paper clip into the emergency-eject
hole located above and to the left of the
CD-ROM drive in-use light.
2. In some models, you might have to remove the
front bezel from the CD-ROM drive to access the
emergency-eject hole.
IBM Netfinity 3500 - Type 8644
55
Summary of Contents for Netfinity 3500 Series
