Working with Memory Modules
Installing or Removing Memory Modules
This section gives the procedure for installing memory modules. If
you want to remove a memory module, reverse the order of the
following steps.
Before you begin:
Read “Electrical Safety” on page 54 and “Handling
Static-Sensitive Devices” on page 55.
Read the documentation that comes with the option.
Read “Accessing the System Board” on page 58.
Notes:
1. Each memory connector contains two keys (dividers), which are
used to assure that a memory-module can be installed only in
the correct position.
2. A retaining clip at each end of the connector locks the memory
module into place.
3. For information about memory configuration, see Table 1 on
page 65.
To install a DIMM:
1. Remove the server cover (see “Preparing to Add Options” on
page 56). Table 1 on page 65.
2. Locate the memory connectors on the system board. See the
illustration at the beginning of this section.
66
Netfinity 3500 User's Handbook
Summary of Contents for Netfinity 3500
