Diagnostic Messages
Result
Test Specific String
Failed
x MB DIMM location J16
Note:
x is the size in megabytes of the DIMM.
Action:
1. Reseat the DIMM in DIMM socket J16.
2. If the problem persists, replace the DIMM.
If the problem persists, have the system serviced.
Failed
x MB DIMM location J15
Note:
x is the size in megabytes of the DIMM.
Action:
1. Reseat the DIMM in DIMM socket J15.
2. If the problem persists, replace the DIMM.
If the problem persists, have the system serviced.
Function: System Cache Messages (202)
Result
Test Specific String
Failed
Microprocessor in socket number U2 (primary).
Note: The Primary Microprocessor Error LED will be on. See “System Board
Illustration” on page 168 for the location of the LED.
Action:
1. Reseat the primary microprocessor (in connector U2).
2. If the problem persists, replace the primary microprocessor.
If the problem persists, have the system serviced.
Failed
Microprocessor in socket number U21 (secondary).
Note: The Secondary Microprocessor Error LED will be on. See “System Board
Illustration” on page 168 for the location of the LED.
Action:
1. Reseat the secondary microprocessor (in connector U21).
2. If the problem persists, replace the secondary microprocessor.
If the problem persists, have the system serviced.
Function: Diskette Drive Messages (206)
Result
Test Specific String
Failed
Internal diskette drive bay.
Action: Have the system serviced.
Function: CD-ROM Messages (215)
Result
Test Specific String
Failed
On system board.
Action: Have the system serviced.
Chapter 6. Solving Problems
129
