Adding Security
Adding Security
You can add elements to your server to help to protect the server itself from theft
and tampering, and to help to protect the data and programs stored in the server
from unauthorized access and use.
Installing a U-Bolt and Security Cable
You can help to deter unauthorized removal of your tower model Netfinity 5000
server by installing a U-bolt and security cable on the rear of your server.
Before you begin
Obtain the following:
– A U-bolt
– A flat-blade screwdriver
– An adjustable wrench
– A 19 mm (3/4 in.) U-bolt or wire rope (similar to National Manufacturing
No. 3230, Stock No. 176-735)
– Threaded nuts that fit the U-bolt
– A security cable
– A lock, such as a combination lock or padlock
Read “Electrical Safety” on page 41 and “Handling Static-Sensitive Devices”
on page 42.
To install a U-bolt and security cable:
1. Remove the server cover. See “Preparing to Install Options” on page 43.
2. Insert the U-bolt through the holes and secure it in place with the nuts.
74
Netfinity 5000 Server Hardware Information and Procedures
