What You Need for Installation
Before you install the Netfinity Fibre Channel PCI Adapter in your
computer, you need the following:
A screwdriver (usually a Phillips #1)
An SC-style duplex cable for the QLA2100F adapter
Adapter Layouts
The following figure identifies the adapter components referenced
throughout this chapter.
J1
ISP2100
Installation Procedures
Attention: To avoid damage to your fibre optic cables, follow
these guidelines
:
Do not route the cable along a folding cable management arm.
When attaching to a device on slides, leave enough slack in the
cable so that it does not bend to a radius smaller than 3 inches
when extended or become pinched when retracted.
Route the cable away from places where it can be snagged by
other devices in the rack.
Do not over tighten the cable ties or bend the cables to a radius
smaller than 3 inches.
4
Netfinity Fibre Channel PCI Adapter Installation and User's Handbook
Summary of Contents for Netfinity Fibre Channel PCI Adapter
