Adapter Hard ID Settings
The Adapter Hard ID Settings option from the Configuration
Settings menu forces the Netfinity Fibre Channel PCI Adapter to use
the selected hard ID (0–125).
Restore Default Settings
The Restore Defaults option from the Configuration Settings menu
restores the PCI adapter default settings.
Raw NVRAM Data
This option displays the adapter nonvolatile random access memory
(NVRAM) contents in hexadecimal format. This is a troubleshooting
tool; you cannot modify the data.
Scan Fibre Channel Devices
This option scans the FC loop and lists all the connected devices by
loop ID. Information about each device is listed, for example,
vendor name, product name, and revision. This information is
useful when configuring your Netfinity Fibre Channel PCI Adapter
and attached devices.
Fibre Channel Disk Utility
This option scans the FC loop bus and lists all the connected devices
by loopID. You can select a disk device and perform a low-level
format or verify the disk media.
Attention: Performing a low-level format destroys all data on the
disk.
24
Netfinity Fibre Channel PCI Adapter Installation and User's Handbook
Summary of Contents for Netfinity Fibre Channel PCI Adapter
