IBM NetVista
ECP Mode Use DMA (3)
When the onboard parallel port is set to ECP mode, the parallel port can use
DMA 3 or DMA 1.
Game Port Address (201)
This item sets the I/O address for the game port.
Midi Port Address (330
)
This item sets the I/O address for the Midi function.
Midi Port IRQ (10)
This item sets the interrupt request for the Midi function.
Power Management
This option lets you control system power management. The system has
various power-saving modes including powering down the hard disk, turning
off the video, suspending to RAM, and software power down that allows the
system to be automatically resumed by certain events.
The power-saving modes can be controlled by timeouts. If the system is
inactive for a time, the timeouts begin counting. If the inactivity continues so
that the timeout period elapses, the system enters a power-saving mode. If
any item in the list of Reload Global Timer Events is Enabled, then any activity
on that item will reset the timeout counters to zero.
If the system is suspended or has been powered down by software, it can be
resumed by a wake up call that is generated by incoming traffic to a modem, a
LAN card, a PCI card, or a fixed alarm on the system realtime clock.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Power Management
Item Help
ACPI
Function
[Enabled]
ACPI Suspend Type
[S1(POS)]
Power Management
[Min Saving]
Video Off Method
[DPMS]
Video Off In Suspend
[Yes]
Suspend Type
[Stop Grant]
MODEM Use IRQ
[3]
Suspend
Mode
[Disabled]
HDD Power Down
[Disabled]
Soft-Off by PWR-BTTN
[Instant-Off]
Wake-Up by PCI card
[Disabled]
Power On by Ring
[Disabled]
Wake Up On LAN
[Enabled]
x
USB KB Wake-Up From S3
Disabled
Resume by Alarm
[Disabled]
x Date (of Month) Alarm
0
x Time (hh:mm:ss) Alarm
0 0
0
** Reload Global Timer Events **
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F7: Default Settings
40/
53