background image

IBM NetVista 

In the IRQ Resources submenu, if you assign an IRQ to Legacy ISA, then that 
Interrupt Request Line is reserved for a legacy ISA expansion card. Press 
<Esc> to close the IRQ Resources submenu. 
In the Memory Resources submenu, use the first item Reserved Memory 
Base to set the start address of the memory you want to reserve for the ISA 
expansion card. Use the second item Reserved Memory Length to set the 
amount of reserved memory. Press <Esc> to close the Memory Resources 
submenu. 
 

PCI/VGA Palette Snoop (Disabled) 

This item is designed to overcome problems that can be caused by some non-
standard VGA cards. This board includes a built-in VGA system that does not 
require palette snooping so you must leave this item disabled. 
 

Assign IRQ For USB (Enabled) 

Names the interrupt request (IRQ) line assigned to the USB on your system.  
Activity of the selected IRQ always awakens the system. 
 

INT Pin1~8 Assignment (Auto

Names the interrupt request (IRQ) line assigned to a device connected to the 
PCI interface on your system.  
 

Date and Time 

 

This item sets the date and time for the system. 

CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software 

Date and Time 

Item Help 

Date (mm:dd:yy) 

Fri, Jul 13 2001 

Time (hh:mm:ss) 

18  :  12  :  11

 

 

Menu Level       
 

 

 

 

 : Move 

Enter  : Select 

+/-/PU/PD:Value: 

F10: Save  ESC: Exit  F1:General Help

 

F5:Previous Values 

 

F7: Default Settings

 

 
Date and Time 

The Date and Time items show the current date and time on the computer. If 
you are running a Windows OS, these items are automatically updated 
whenever you make changes to the Windows Date and Time Properties utility. 

   

44/

53 

Summary of Contents for NetVista 6049






















































Reviews: