Table 7. NSBxxxx error codes and text messages (continued)
Error code
Error message
What you should do
NSB40510
USB initialization failure.
Disconnect any USB devices from the thin
client and restart the system. If the
symptom remains, replace the thin client
logic unit (see “Replacing the logic unit”
CompactFlash card messages (NSB51xxx)
NSB51500
File not found on flash
card.
Check the contents of the CompactFlash
card.
NSB51510
Cannot close file on flash
card.
Check the contents of the CompactFlash
card.
Token Ring messages (NSB61xxx)
NSB61500
Token Ring PCI device
not detected.
Restart the thin client. If the symptom
remains, replace the thin client logic unit
(see “Replacing the logic unit” on page 27).
NSB61510
Token Ring PCI device
soft reset failed.
Restart the thin client. If the symptom
remains, replace the thin client logic unit
(see “Replacing the logic unit” on page 27).
NSB61520
Token Ring PCI device
initialization timed out.
Restart the thin client. If the symptom
remains, take any actions recommended by
the text messages that accompany this
message. If you still cannot resolve the
problem, replace the thin client logic unit
(see “Replacing the logic unit” on page 27).
NSB61530
Token Ring PCI device
initialization not complete.
Restart the thin client. If the symptom
remains, take any actions recommended by
the text messages that accompany this
message. If you still cannot resolve the
problem, replace the thin client logic unit
(see “Replacing the logic unit” on page 27).
NSB61569
Token Ring open
command canceled due to
failure.
Adapter failed to insert into ring. Perform
any actions recommended by the messages
that accompany this error.
NSB61610
Token Ring flash contents
not valid.
Microcode corruption. Replace the thin
client logic unit (see “Replacing the logic
unit” on page 27).
NSB61620
Token Ring flash contents
not valid.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
NSB61639
Token Ring error in loop
back test phase.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
NSB61639
Token Ring error in ring
insertion phase.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
NSB61649
Token Ring error in
address verification phase.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
NSB61659
Token Ring error in
neighbor notification
phase.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Resolving hardware problems
19
