Setting up the hardware
The
Quick Setup for IBM NetVista N70 thin client, Type 8366
(SA23-2824) pamphlet,
which ships with your hardware, provides the following information. This section
goes into more detail for your convenience.
Read “Safety notices” on page v before you continue with these instructions.
Unpacking your hardware
Unpack your hardware. Contact your reseller, or IBM, if
you do not have these standard parts:
1
Thin client logic unit
2
Support Base
3
Mouse
4
Keyboard
5
Power cable
Installing options:
v
If you have additional memory, or optional feature
cards, see “Appendix B. Hardware procedures” on
page 39 before continuing with the following setup
procedures.
v
For vertical placement of the thin client
™
, see
“Installing the support base” on page 8.
v
For horizontal placement of the hardware, continue
with “Connecting your hardware” on page 8.
Security Option:
If you would like to restrict access to the logic unit the
N70 thin client provides a locking device keyhole (cable
lock). This keyhole is located on the top of the logic unit
near the back of the machine
6
.
You can obtain a suitable locking cable (for example a
Kensington Lock or similar device) that can be inserted
through the holes and then secured to a suitable place
7
, such as a table or desk.
When in use the logic unit cannot be opened, preventing
theft of internal components or removal from the place to
which it is secured.
© Copyright IBM Corp. 2001
7