b.
Open the retaining clip on each end of the DIMM slot. Turn the DIMM so
that the pins align correctly with the connector.
Note:
To avoid breaking the retaining clips or damaging the DIMM
connectors, open and close the clips gently.
c.
Insert the DIMM into the connector by aligning the DIMM edges with the
slots at each end of the DIMM connector. Firmly press the DIMM straight
down into the connector by applying pressure on both ends of the DIMM
simultaneously. Be sure that the retaining clips snap into the locked
position when the DIMM is firmly seated in the connector.
d.
If a gap exists between the DIMM and the retaining clips, the DIMM has
not been correctly installed. In this case, open the retaining clips and
remove the DIMM; then, reinsert the DIMM.
e.
If you removed the AGP adapter, reinstall it now. See “Installing an
adapter” on page 48 for details.
8.
If you have other options to install or remove, do so now.
9.
Replace the support bracket assembly and reconnect the fan cable to the
connector (SYSFA3) on the system board. See “Removing the support bracket
assembly” on page 46 for installation instructions.
10.
Reinstall the side cover. See “Installing the cover” on page 58 for details.
11.
Reconnect the external cables and power cords; then, turn on the attached
devices and the computer.
If you want to remove a DIMM, reverse the previous steps.
Installing a security U-bolt
To help prevent hardware theft, you can add a security U-bolt and cable to your
computer. After you add the security cable, make sure that it does not interfere
with other cables that are connected to the computer.
Before you begin:
v
Obtain the following items:
– A flat-blade screwdriver
– An adjustable wrench
– A 199 mm (3/4 in.) U-bolt or wire rope (similar to National Manufacturing
No. 3230, Stock No. 176-735)
– Threaded nuts that fit the U-Bolt
– A security cable
– A lock, such as a combination lock or padlock.
v
Read the information in “Handling static-sensitive devices” on page 38, and
“Safety information” on page 39.
Chapter 5. Installing options
57
Summary of Contents for NetVista X40
