42
Flash (BIOS) Update Procedure
NOTE: The flash update procedure does not change the model number and serial number information in BIOS.
1.
Prepare a bootable DOS diskette with AWDFLASH.EXE and VXXYYZZ.BIN files
NOTE:
The AWDFLASH.EXE is flash utility programs. The VXXYYZZ.BIN is a BIOS source code binary file.
2.
Insert the diskette and boot from drive A.
WARNING:
Do not boot with any memory related driver such as HIMEM.SYS, EMS.SYS
3.
At the DOS prompt, type
A: > AWDFLASH VXXYYZZ
.BIN and then press
Enter
.
4.
The screen shows: “Do You Want To Save Bios (Y/N)”. Type
Y
if you want to save old bios data, and
N
if you do not.
5.
When the screen shows: “Are You Sure To Program (y/n)”, type
Y
to flash and update the system bios.
6.
The program updates the BIOS automatically.
7.
Wait for the update to complete.
WARNING:
Do not turn off the system power while the BIOS is programming, or the flash ROM will be destroyed.
8. Press
F1
to Reset (or press
F10
to exit) the system after the BIOS is completely updated.
Summary of Contents for PC 300
