What to do next
Go to the device-record form in Using Your Personal Computer, and write the
adapter name next to the slot into which you installed it.
If you removed the bottom cover, the fan, or the system board, replace them.
See “Moving the Fan” on page 36, “Moving the System Board” on page 34,
and “Opening the Bottom Cover” on page 32.
To work with another option, go to the appropriate section.
To complete the installation, go to Chapter 7, “Completing the Installation”
on page 66.
Removing Adapters from the Riser Card
Before you begin
Read “Electrical Safety” on page 3 and “Handling Static-Sensitive Devices”
on page 4.
Turn off the computer and all other connected devices.
Disconnect all cables attached to the computer (see “Disconnecting Cables
and Removing the Cover” on page 5).
Attention:
The presence of 5 V standby power might result in damage to
your hardware unless you disconnect the power cord from the wall before
opening the computer.
Remove the computer cover, and lay the computer on its side (see
“Disconnecting Cables and Removing the Cover” on page 5).
To remove some adapters, you might need to remove the bottom cover, the
system board, and the fan. For more information, see “Opening the Bottom
Cover” on page 32, “Moving the System Board” on page 34, and “Moving
the Fan” on page 36.
28
Installing Options in Your Personal Computer
Summary of Contents for PC 300GL Type 6285
Page 2: ......
Page 96: ...IBM Part Number 06J0846 Printed in U S A April 1999 ð6Jð846 ...