Using the Configuration/Setup Utility
Configuring Devices and I/O Ports
You can view or change the assignments for devices and ports.
Some programs and devices require specific assignments. Review
the documentation that comes with the device for more information.
To view or change the assignments for devices, video, and serial or
parallel ports:
1. Turn on the system. When the F1 prompt appears, press F1.
The Configuration/Setup Utility menu appears.
2. Select Devices and I/O Ports.
3. Use the Up Arrow (
↑
) key or the Down Arrow (
↓
) key to
highlight the assignment that you want to change. Use the Left
Arrow (
←
) and Right Arrow (
→
) keys to scroll through the list
of available choices and make a selection. If the assignment
conflicts with another assignment, an asterisk appears next to
the conflicting setting. You must change one of the conflicting
settings to a value that does not conflict.
4. When you complete all changes to the menu, press Esc to return
to the Configuration/Setup menu.
Assigning Serial Ports
Your system comes with two 9-pin serial ports. You can add serial
ports by installing a serial adapter in one of the expansion slots.
Software recognizes serial ports from their serial-port assignments.
No two serial ports can have the same serial-port assignment. This
normally is handled by the Configuration/Setup utility program,
but you might have special hardware or software that requires you
to change these assignments.
You can set either serial port as Serial 1 through Serial 4.
Configuring Video Options
Your server supports a wide assortment of monitors. Because
characteristics of monitor types vary, you should review the
documentation that came with the monitor to determine the monitor
type and refresh rate.
154
PC Server 520 User's Handbook for PCI/Micro Channel
Summary of Contents for PC Server 520
