Installing Internal Drives
6. Orient the drive
.3/
so that the power and signal
.4/
connectors
are near the top surface of the drive; then, place the drive on the
static-protective surface again.
7. Place the carrier
.2/
on top of the drive.
8. Attach the carrier using four screws
.1/
of appropriate size and
length. The carrier includes EMI/ESD grounding clips
.5/
that
make contact with the drive through two of the screws.
Note: The screws are included in the drive accessory kit that
came with your server.
1
2
3
4
5
Chapter 3. Installing Options
169
