Setting System-Board Configuration Jumpers
To change the location of the Video Sleep Register, do the following
steps:
1. Identify the Video-Sleep-Register jumper, J6A2.
Video Sleep
J6A2
46E8
1
1 2 3
3C3
2. If the processor board blocks access to the jumper, remove it
(see steps 2 through 5 on page 94).
3. Set the address of the Video-Sleep Register:
a. To set the address to 03C3H (factory default), move the
jumper to pins 1 and 2.
b. To set the address to 46E8H, move the jumper to pins 2
and 3.
4. If you removed the processor board, install it (see steps 12 on
page 96 through 12e on page 98).
5. Complete the installation (see “Completing the Installation” on
page 197).
Appendix A. Server Records
289
