background image

 

EDITION Edition Notice

 

Safety Information

  
 Refer to the 

Hardware Maintenance Reference General Information

 pamphlet in this manual for the following information:
  
 ¯   General Safety
  
 ¯   Electrical Safety.
  
 

First Edition (November 1991)

  
 

The following paragraph does not apply to the United Kingdom or any

 

country where such provisions are inconsistent with local law.

 INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION
 "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
 INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  Some states do
 not allow disclaimer or express or implied warranties in certain
 transactions, therefore, this statement may not apply to you.
  
 This publication could include technical inaccuracies or typographical
 errors.  Changes are periodically made to the information herein;
 these changes will be incorporated in new editions of the publication.
 IBM may make improvements and/or changes in the product(s) and/or the
 program(s) described in this publication at any time.
  
 It is possible that this publication may contain reference to, or
 information about, IBM products (machines and programs), programming,
 or services that are not announced in your country.  Such references
 or information must not be construed to mean that IBM intends to
 announce such IBM products, programming, or services in your country.
  
 Requests for technical information about IBM products should be made
 to your IBM Authorized Dealer or your IBM Marketing Representative.
  
 IBM may have patents or pending patent applications covering subject
 matter in this document.  The furnishing of this document does not
 give you any license to these patents.  You can send license
 inquiries, in writing, to the IBM Director of Commercial Relations,
 IBM Corporation, Armonk, NY 10577.
  
 

_ Copyright International Business Machines Corporation 1991.

  

All

 

rights reserved.

 Note to U.S. Government Users -- Documentation related to restricted
 rights -- Use, duplication or disclosure is subject to restrictions
 set forth in GSA ADP Schedule Contract with IBM Corp.

IBM PS/2 Model CL57 SX HMR

Edition Notice

_ Copyright IBM Corp. 1991

EDITION - 1

Summary of Contents for Personal System/2 CL57 SX































































Reviews: