6.11 1110 Math Coprocessor
Warning: Because the math coprocessor can be damaged by an electrostatic
discharge, establish personal grounding by touching a ground point with
one hand before touching the math coprocessor. Once you are grounded,
remove the math coprocessor being very careful not to bend the pins.
Note:
When reinstalling the math coprocessor, align the dot PICTURE 26
on the math coprocessor with the beveled corner PICTURE 27 of its
socket, then firmly press it into place.
IBM PS/2 Model CL57 SX HMR
1110 Math Coprocessor
_ Copyright IBM Corp. 1991
6.11 - 1