manualshive.com logo in svg

IBM Power 595, Technical Overview And Introduction

The IBM Power 595 is a high-performance server designed for mission-critical workloads. This Technical Overview And Introduction manual provides users with detailed information on the product features and capabilities. Download the manual for free from 88.208.23.73:8080 to learn more about this powerful server.

Share
Download
background image

© Copyright IBM Corp. 2008. All rights reserved.

iii

Contents

Notices

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Trademarks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  viii

Preface

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ix

The team that wrote this paper  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ix
Become a published author . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Comments welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x

Chapter 1.  General description

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

1.1  Model overview and attributes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
1.2  Installation planning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

1.2.1  Physical specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
1.2.2  Service clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
1.2.3  Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
1.2.4  Power requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

1.3  Minimum configuration requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

1.3.1  Minimum required processor card features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
1.3.2  Memory features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
1.3.3  System disks and media features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
1.3.4  I/O Drawers attachment (attaching using RIO-2 or 12x I/O loop adapters)  . . . . .  15
1.3.5  IBM i, AIX, Linux for Power I/O considerations . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
1.3.6  Hardware Management Console models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
1.3.7  Model conversion  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18

1.4  Racks power and cooling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29

1.4.1  Door kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30
1.4.2  Rear door heat exchanger  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31
1.4.3  Power subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31

1.5  Operating system support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32

1.5.1  IBM AIX 5.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
1.5.2  IBM AIX V6.1  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
1.5.3  IBM i 5.4 (formerly IBM i5/OS V5R4)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
1.5.4  IBM i 6.1  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
1.5.5  Linux for Power Systems summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35

Chapter 2.  Architectural and technical overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  37

2.1  System design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  38

2.1.1  Design highlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  38
2.1.2  Center electronic complex (CEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40
2.1.3  CEC midplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
2.1.4  System control structure (SCS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  43
2.1.5  System controller (SC) card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47
2.1.6  System VPD cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48
2.1.7  Oscillator card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49
2.1.8  Node controller card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49
2.1.9  DC converter assembly (DCA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50

2.2  System buses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51

2.2.1  System interconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
2.2.2  I/O subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55

2.3  Bulk power assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57

Summary of Contents for Power 595





























































































































































































Reviews:

No comments

Related manuals for Power 595

NEC Express5800/320Ma Planning Manual preview
Express5800/320Ma
Brand: NEC Pages: 80
NEC Express5800/320Ma Technical Reference Manual preview
Express5800/320Ma
Brand: NEC Pages: 90
Cabletron Systems MicroMMAC 22ES Installation Manual preview
MicroMMAC 22ES
Brand: Cabletron Systems Pages: 93
ACTi ACD-2200 Quick Installation Manual preview
ACD-2200
Brand: ACTi Pages: 15
Cabletron Systems CSMIM2-16 Installation Manual preview
CSMIM2-16
Brand: Cabletron Systems Pages: 100
Supermicro AS -5019D-FTN4 User Manual preview
AS -5019D-FTN4
Brand: Supermicro Pages: 113
SpectraLink IP-DECT SERVER 6500 Specifications preview
IP-DECT SERVER 6500
Brand: SpectraLink Pages: 2
Supero 6047R User Manual preview
6047R
Brand: Supero Pages: 112
QNAP Disk On-line Server NAS-2100 User Manual preview
Disk On-line Server NAS-2100
Brand: QNAP Pages: 112
Silex technology DS-510 Package Contents preview
DS-510
Brand: Silex technology Pages: 2
Polycom KIRK 500 User Manual preview
KIRK 500
Brand: Polycom Pages: 34
Polycom SpectraLink 020 Administration Manual preview
SpectraLink 020
Brand: Polycom Pages: 47
Visel Italiana QS-RETAILBOX PRO User Manual preview
QS-RETAILBOX PRO
Brand: Visel Italiana Pages: 12
IBM @Server pSeries 630 6E4 Service Manual preview
@Server pSeries 630 6E4
Brand: IBM Pages: 651
Lantronix CoBox E2 01 Installation Manual preview
CoBox E2 01
Brand: Lantronix Pages: 41
Mirapoint 7700 Series Hardware Manual preview
7700 Series
Brand: Mirapoint Pages: 76
3onedata NP302T Series Quick Installation Manual preview
NP302T Series
Brand: 3onedata Pages: 3
Lantronix XPort Direct+ User Manual preview
XPort Direct+
Brand: Lantronix Pages: 80

Brands by name

Popular brands

Load more brands