manualshive.com logo in svg

IBM Power 595, Technical Overview And Introduction

The IBM Power 595 is a high-performance server designed for mission-critical workloads. This Technical Overview And Introduction manual provides users with detailed information on the product features and capabilities. Download the manual for free from 88.208.23.73:8080 to learn more about this powerful server.

Share
Download
background image

iv

 

IBM Power 595 Technical Overview and Introduction

2.3.1  Bulk power hub (BPH)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58
2.3.2  Bulk power controller (BPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
2.3.3  Bulk power distribution (BPD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
2.3.4  Bulk power regulators (BPR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61
2.3.5  Bulk power fan (BPF)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62
2.3.6  Integrated battery feature (IBF). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63
2.3.7  POWER6 EnergyScale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63

2.4  System cooling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
2.5  Light strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
2.6  Processor books . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

2.6.1  POWER6 processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73
2.6.2  Decimal floating point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  76
2.6.3  AltiVec and Single Instruction, Multiple Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77

2.7  Memory subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  78

2.7.1  Memory bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  79
2.7.2  Available memory features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  80
2.7.3  Memory configuration and placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  81

2.8  Internal I/O subsystem  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  82

2.8.1  Connection technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  83
2.8.2  Internal I/O drawers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  84
2.8.3  Internal I/O drawer attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  88
2.8.4  Single loop (full-drawer) cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  89
2.8.5  Dual looped (half-drawer) cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  90
2.8.6  I/O drawer to I/O hub cabling sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  90

2.9  PCI adapter support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  92

2.9.1  LAN adapters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93
2.9.2  SCSI adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93
2.9.3  iSCSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  94
2.9.4  SAS adapters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  94
2.9.5  Fibre Channel adapters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  95
2.9.6  Asynchronous, WAN, and modem adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  95
2.9.7  PCI-X Cryptographic Coprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  96
2.9.8  IOP adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97
2.9.9  RIO-2 PCI adapter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97
2.9.10  USB and graphics adapters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97

2.10  Internal storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97
2.11  Media drawers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

2.11.1  Media drawer, 19-inch (7214-1U2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  99
2.11.2  DVD/Tape SAS External Storage Unit (#5720). . . . . . . . . . . . . . . . . . . . . . . . . .  99

2.12  External I/O enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  100

2.12.1  TotalStorage EXP24 Disk Dwr (#5786). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  100
2.12.2  PCI Expansion Drawer (#5790)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  100
2.12.3  EXP 12S Expansion Drawer (#5886) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  100

2.13  Hardware Management Console (HMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  101

2.13.1  Determining the HMC serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  102

2.14  Advanced System Management Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  103

2.14.1  Accessing the ASMI using a Web browser . . . . . . . . . . . . . . . . . . . . . . . . . . . .  103
2.14.2  Accessing the ASMI using an ASCII console . . . . . . . . . . . . . . . . . . . . . . . . . .  104
2.14.3  Accessing the ASMI using an HMC  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  104
2.14.4  Server firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  105

Chapter 3.  Virtualization

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  109

3.1  Virtualization feature support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  109

Summary of Contents for Power 595





























































































































































































Reviews:

No comments

Related manuals for Power 595

Lantronix SLC 8000 Demo Manual preview
SLC 8000
Brand: Lantronix Pages: 10
Lantronix xport pro Integration Manual preview
xport pro
Brand: Lantronix Pages: 17
Lantronix PremierWave XC User Manual preview
PremierWave XC
Brand: Lantronix Pages: 109
Lantronix XPort Integration Manual preview
XPort
Brand: Lantronix Pages: 24
Lantronix WiPort Integration Manual preview
WiPort
Brand: Lantronix Pages: 29
Lantronix XPress DR+ Quick Connect preview
XPress DR+
Brand: Lantronix Pages: 2
Moxa Technologies NPort IA5250I/5250I-T Series Quick Installation Manual preview
NPort IA5250I/5250I-T Series
Brand: Moxa Technologies Pages: 2
IBM Power 780 Technical Overview And Introduction preview
Power 780
Brand: IBM Pages: 220
IEI Technology PUZZLE-IN004 Series User Manual preview
PUZZLE-IN004 Series
Brand: IEI Technology Pages: 102
Inspur NF5486M5 Installation Manual preview
NF5486M5
Brand: Inspur Pages: 2
Asus RS160-E4 PA4 User Manual preview
RS160-E4 PA4
Brand: Asus Pages: 186
Dell Active Fabric Manager Installation Manual preview
Active Fabric Manager
Brand: Dell Pages: 44
Dell E36S Series Owner'S Manual preview
E36S Series
Brand: Dell Pages: 120
Dell 1920 Getting Started Manual preview
1920
Brand: Dell Pages: 76
Dell Active Fabric Manager Deployment Manual preview
Active Fabric Manager
Brand: Dell Pages: 127
Dell E45S001 Installation And Service Manual preview
E45S001
Brand: Dell Pages: 122
Dell DR4000 Restore Manager Owner'S Manual preview
DR4000 Restore Manager
Brand: Dell Pages: 156
Dell Chassis Management Controller User Manual preview
Chassis Management Controller
Brand: Dell Pages: 234

Brands by name

Popular brands

Load more brands