manualshive.com logo in svg

IBM Power 595, Technical Overview And Introduction

The IBM Power 595 is a high-performance server designed for mission-critical workloads. This Technical Overview And Introduction manual provides users with detailed information on the product features and capabilities. Download the manual for free from 88.208.23.73:8080 to learn more about this powerful server.

Share
Download
background image

 Contents 

v

3.2  PowerVM and PowerVM editions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  110
3.3  Capacity on Demand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  111

3.3.1  Permanent activation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  112
3.3.2  On/Off CoD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  113
3.3.3  Utility CoD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  114
3.3.4  Trial CoD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  114
3.3.5  Capacity Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  114

3.4  POWER Hypervisor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  115
3.5  Logical partitioning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

3.5.1  Dynamic logical partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  117
3.5.2  Shared processor pool partitions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  117
3.5.3  Shared dedicated capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  118
3.5.4  Multiple shared processor pools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  118

3.6  Virtual Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
3.7  Virtual I/O Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

3.7.1  Virtual SCSI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  121
3.7.2  Shared Ethernet Adapter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  122

3.8  PowerVM Lx86  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  124
3.9  PowerVM Live Partition Mobility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  125
3.10  AIX 6 workload partitions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  127
3.11  System Planning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  128

Chapter 4.  Continuous availability and manageability

 . . . . . . . . . . . . . . . . . . . . . . . .  131

4.1  Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  132

4.1.1  Designed for reliability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  132
4.1.2  Placement of components  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  133
4.1.3  Continuous field monitoring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  133

4.2  Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  134

4.2.1  Detecting and deallocating failing components. . . . . . . . . . . . . . . . . . . . . . . . . .  134
4.2.2  Special uncorrectable error handling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  141
4.2.3  Cache protection mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  142
4.2.4  The input output subsystem  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  143
4.2.5  Redundant components and concurrent repair update. . . . . . . . . . . . . . . . . . . .  145
4.2.6  Availability in a partitioned environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  148
4.2.7  Operating system availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  149

4.3  Serviceability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  150

4.3.1  Service environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  151
4.3.2  Service processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  151
4.3.3  Detecting errors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  152
4.3.4  Diagnosing problems  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  154
4.3.5  Reporting problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  155
4.3.6  Notifying the appropriate contacts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  157
4.3.7  Locating and repairing the problem  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  158

4.4  Operating system support for RAS features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  160
4.5  Manageability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

4.5.1  Service processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  162
4.5.2  System diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  163
4.5.3  Electronic Service Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  163
4.5.4  Manage serviceable events with the HMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  165
4.5.5  Hardware user interfaces  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  165
4.5.6  IBM System p firmware maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  166
4.5.7  Management Edition for AIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  168
4.5.8  IBM Director  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  168

Summary of Contents for Power 595





























































































































































































Reviews:

No comments

Related manuals for Power 595

B&B Electronics Serial Servers Vlinx VESR9xx Instruction Manual preview
Serial Servers Vlinx VESR9xx
Brand: B&B Electronics Pages: 61
IBM Power 750 Express Hardware Announcement preview
Power 750 Express
Brand: IBM Pages: 86
IBM eServer 200 xSeries User Reference Manual preview
eServer 200 xSeries
Brand: IBM Pages: 128
IBM eServer 232 xSeries User Reference Manual preview
eServer 232 xSeries
Brand: IBM Pages: 174
H3C UniServer R2700 G3 User Manual preview
UniServer R2700 G3
Brand: H3C Pages: 226
ORiNG IDS-5042 Series User Manual preview
IDS-5042 Series
Brand: ORiNG Pages: 67
Discover Video Devos 4 User Manual preview
Devos 4
Brand: Discover Video Pages: 148
ARAID 1500 User Manual preview
1500
Brand: ARAID Pages: 20
Meinberg IMS LANTIME M3000 Manual preview
IMS LANTIME M3000
Brand: Meinberg Pages: 139
Xantech XMusicw+ User Manual preview
XMusicw+
Brand: Xantech Pages: 52
Planet FPS-1012N Quick Installation Manual preview
FPS-1012N
Brand: Planet Pages: 28
Sugon I620-G20 User Manual preview
I620-G20
Brand: Sugon Pages: 155
B&B Electronics ESP904 Owner'S Manual preview
ESP904
Brand: B&B Electronics Pages: 39
Lantronix I/O 2100 User Manual preview
I/O 2100
Brand: Lantronix Pages: 190
Iomega 34340 - StorCenter Pro ix4-100 NAS Server Quick Start Manual preview
34340 - StorCenter Pro ix4-100 NAS Server
Brand: Iomega Pages: 40
Lantronix MSS Reference Manual preview
MSS
Brand: Lantronix Pages: 93
Gateway 935 series Installation Manual preview
935 series
Brand: Gateway Pages: 22
FieldServer PS56-BAS-xxx Slotserver Start-Up Manual preview
PS56-BAS-xxx
Brand: FieldServer Pages: 12

Brands by name

Popular brands

Load more brands