5.
Attach the mounting bracket
(C)
to the slot on the inside of the right slide by pulling the pin out
(1)
,
and sliding the mounting bracket
(C)
into the slide rail until the spring-loaded pin snaps into place
(2)
, as shown in Figure 16.
6.
Place the cable-management arm
(D)
on the support arm
(A)
. Pull out the cable-management arm pin
(1)
, and then slide the cable-management arm tab
(2)
into the slot on the mounting bracket
(C)
. Push
the tab until it snaps into place. Pull out the other cable-management arm pin
(3)
, and then slide that
cable management arm tab into the extension bracket
(E)
slot
(4)
on the outside of the right slide rail.
Push the tab until it snaps into place, as shown in Figure 17 on page 13.
Figure 15. Installing the extension bracket into the slide rail
Figure 16. Installing the mounting bracket into the slide rail
12
Power Systems: Installing the IBM Power 710 Express (8231-E1C) or IBM Power 730 Express (8231-E2C)
Summary of Contents for POWER 730
Page 2: ......
Page 57: ......
Page 58: ...Part Number 00L5066 Printed in USA GI11 9861 03 1P P N 00L5066...
