4.
Update the time of day on the managed system by using the Advanced System Management Interface
(ASMI).
To set up and access the ASMI, complete the following steps:
a.
In the navigation area, expand
Systems Management > Servers
.
b.
In the content area, select the managed system.
c.
In the task area, expand
Operations
.
d.
Click
Launch Advanced System Management (ASM)
.
To change the time of day by using the ASMI, complete the following steps:
a.
On the ASMI Welcome pane, specify your admin user ID and password, and click
Log In
.
b.
In the navigation area, expand
System Configuration
.
c.
Click
Time of Day
. The right pane displays a form that shows the current date (month, day, and
year) and time (hours, minutes, and seconds).
d.
Change the date value, the time value, or both, and click
Save settings
.
5.
Check the firmware level on the managed system.
To check the firmware level on the managed system, in the navigation area, click
Updates
. Firmware
information is displayed in the contents area.
6.
Compare your installed firmware level with available firmware levels. If required, update your
firmware levels:
a.
Compare your installed firmware level with available firmware levels. For more information, see
the Fix Central website (http://www.ibm.com/support/fixcentral/).
b.
If required, update your managed system firmware levels. In the navigation area, click
Updates
.
c.
In the contents area, select your managed system.
d.
Click
Change Licensed Internal Code for the current release
.
7.
Power on your managed system by using the correct
Power On Parameters
. To power-on your
managed system by using the HMC, complete the following steps:
a.
View your managed system's properties and verify that the logical partition Start policy is set to
User-Initiated
. To verify that the logical partition start policy is set to
User-Initiated
, complete the
following steps:
1)
In the navigation area, expand
Systems Management > Servers
.
2)
In the content area, select the managed system.
3)
In the tasks area, click
Properties
.
4)
Click the
Power On Parameters
tab.
5)
Ensure that the
Partition start policy
field is set to
User-Initiated
.
b.
Power on the managed system. To power on the managed system, complete the following steps:
1)
In the navigation area, expand
Systems Management > Servers
.
2)
In the content area, select the managed system.
3)
Click
Operations > Power On
.
4)
Select a power-on option, and click
OK
.
8.
Create partitions or deploy an imported system plan.
For instructions about creating partitions, see Partitioning with the HMC (http://
publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/p7hat/iphbllparwithhmcp6.htm).
For instructions about deploying system plans, see Deploying a system plan by using an HMC
(http://publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/p7hc6/
iphc6deploysysplanp6.htm).
9.
Install an operating system and update the operating system.
For instructions to install the AIX operating system, see Installing AIX (http://
publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/ipha8/iphayinstallaix.htm).
22
Power Systems: Installing the IBM Power 710 Express (8231-E1C) or IBM Power 730 Express (8231-E2C)
Summary of Contents for POWER 730
Page 2: ......
Page 57: ......
Page 58: ...Part Number 00L5066 Printed in USA GI11 9861 03 1P P N 00L5066...
