Power775 Disk Enclosure Fan Service Procedure
33 of 61
STEP 24
Disconnect the 2 Water Hoses from the rear of the Disk Enclosure by pulling the retaining ring on the hose (see
Figure 22 Water Hose Connector).
CAUTION:
The water-based coolant solution may contain an additive intended to inhibit corrosion (or
provide other functions). The solution may cause irritation to the skin or eyes. Avoid direct contact with the
solution. Employ appropriate Personal Protective Equipment when performing operations involving the
coolant or which may potentially expose you to the coolant. Refer to the MSDS for more information.
(C037)
CAUTION:
Protective eyewear is needed for the procedure. (L011)
CAUTION:
Chemical resistant gloves are needed for this procedure. (L014)
DANGER:
Risk of electric shock due to water or a water solution which is present in this product.
Avoid working on or near energized equipment with wet hands or when spilled water is present. (L016)
ATTENTION: Observe the 4 safety notices above for all future steps involving attaching or disconnecting
water hoses.
Figure 22 Water Hose Connector
Retaining Ring
