placement rules and slot priorities(http://www.ibm.com/support/knowledgecenter/POWER8/
p8eab/p8eab_mtm_pciplacement.htm) and select the system you are working on.
Connector information
v
Two RJ-45 ports
v
Two LED adapter status indicators per port, for link activity and speed
Attributes provided
v
PCIe x4, generation-1 or generation-2
v
4-Port machine access code (MAC)
v
High performance IPV4/IPV6 checksum offload
v
Supports large send and large receive
v
Multiple queues
v
VIOS
The following figure shows the adapter.
Adapter LED states
The LEDs on the adapter provide information about the operation status of the adapter. The LEDs are
visible through the mounting bracket. Figure 32 shows the location of the LEDs. Table 7 describes the
different LED states and what those states indicate.
Table 7. Adapter LEDs and descriptions
LED
Light
Description
Speed
Yellow
10 Mbps or 100 Mbps
Green
1000 Mbps or 1 Gbps
Activity/link
Green flashing
Active link or data activity
Off
No link
The absence of a link can indicate a defective cable,
defective connector, or a configuration mismatch.
For details about slot priorities and placement rules, see PCIe adapter placement rules and slot
priorities(http://www.ibm.com/support/knowledgecenter/POWER8/p8eab/
Figure 32. Adapter
34
Installing the System and Ordered Parts for the 8348-21C
Summary of Contents for Power Systems S812LC 8348-21C
