Location code topics
Description
Contains background information on the use of location
codes.
Provides a definition for physical location code.
Provides a definition for a logical location code.
“Location code format” on page 84
Provides descriptive information of the Un value in the
location code string. For example U5886.001.
“Location code labels” on page 85
Provides a table that identifies and defines the location
code labels. The location code labels begin with an
alphabetic character and follow the system serial number.
For example, U789C.001.10ABCDE-P3-C31-T2-L23. The
system serial number is 10ABCDE in the previous
example. P3, C31, T2, and L23 all contain an alphabetic
character that is identified in the Location code labels
table.
“Worldwide unique identifier” on page 85
Provides a definition for the worldwide unique identifier.
This group of digits follows the resource code labels and
always begins with the letter W.
Location code overview
Servers (system unit and expansion units) use physical location codes to provide mapping of replaceable
units. Location codes are produced by the server's firmware, which structures them so that they can be
used to identify specific parts in a system. The location code format is the same for all servers.
If you are working with a specific location code, the feature immediately follows the first character
(U5886). Refer to the Unit type and locations table.
If the location code ends with -Txx-Lxx, the server's firmware could not identify the physical location.
When a physical location cannot be identified, a logical location code is provided. Where logical location
codes occur in enclosures, the locations topic for the enclosure has the known conversions listed. For
logical location codes with no conversion, contact your next level of support.
If the location code begins with UTMPx, the expansion I/O unit's machine type, model, and serial
number have not been set yet and this is a temporary unit identifier. To identify the unit, examine the
display panels on all of the expansion I/O units that are connected to the server until you find one with
the same characters in the first 5 digits of the top line in the unit's display. Record the unit's real machine
type and model from the unit label. Match the unit's machine type and model in the Unit type and
locations table and follow the link to determine the service information.
Note:
If locations for units are not in the preceding format, either they are not supported or there is a
problem in the firmware. Contact your next level of support.
Physical location codes
Physical location codes provide a mapping of logical functions and components (such as backplanes,
removable modules, connectors, ports, cables, and devices) to their specific locations within the physical
structure of the server.
Logical location codes
If the physical location cannot be mapped to a physical location code, the server's firmware generates a
logical location code. A logical location code is a sequence of location labels that identifies the path that
the system uses to communicate with a given resource.
Finding parts, locations, and addresses
83
Summary of Contents for Power Systems Series
